Avcom Single Band Frequency Converter Make High Freq. Measurements on Your Low Freq. Analyzer

Avcom Single Band Frequency Converter Make High Freq. Measurements on Your Low Freq. Analyzer

Make High Frequency Measurements on Your “Low Frequency” Analyzer AVCOM frequency extenders are up/downconverters that let you view high/low frequency signals on your existing spectrum analyzer(AVCOM or any other manufacturer). They consist of a mixer and oscillator, tuned to downconvert incoming signals so that they fall between 0 and 1 GHz. Being straight downconverted signals, you can work with all the resolution and features inherent in your existing spectrum analyzer. The AVCOM analyzer will recognize the extender in use and display the offset frequency. Standard and custom frequency bands available. They may be powered by an external power supply, or coaxially if your analyzer has DC insertion on the input.

Pricing Varies

Custom Single Band Freq. Extenders

Avcom Single Band Frequency Converter Make High Freq. Measurements on Your Low Freq. Analyzer

SKU AV-MFC Category Brand:

Features

STANDARD CONFIGURATIONS: SINGLES: Model MFC – 0610 – 17: Input 600 – 1000MHz Model MFC – 5060 – 17 /- 65: Input 5.0 – 6.0GHz Model MFC – 3242 – 17 /- 45: Input 3.2 – 4.2GHz Model MFC – 1225 – 65: Input 1.2 – 2.5GHz Model MFC – 2030 – 65: Input 2.0 – 3.0GHz DUALS: Model MFC – 1225 / 2537 – 65: 1.2 – 2.5GHz/2.5 – 3.7GHz Model MFC – 2030 / 5060 – 65: 2.0 – 3.0GHz/5.0 – 6.0GHz CUSTOM CONFIGURATIONS Specify analyzer make, model number, input frequency range, power supply (external or coaxial) and if DC insertion posts are required.

Additional Product Specs

TECHNICAL SPECIFICATIONS Frequency Accuracy: ± 1/2% Insertion Loss: ± 2dB at Center Frequency Input/Output Connector: Type N, 50 Ohm Impedance Power Requirements: 12 VDC, 150 ma Max Size: LCD Compact Model: 1.75” w x 6.75”h x 6.625”d CRT & Custom Model: 2.25”w x 6.75”h x 8”d

Extended Information

Note: DC insertion posts available to power LNB’s, line amps, etc. Specifications may vary by converter model and frequency. MFC’s are analyzer specific and NOT Interchangeable Options: Custom frequencies available to 14.5 GHz LNB power and 22 KHz signal available in custom converters Use All Your Analyzers Features! The MFC Series Converters consist of a mixer and oscillator, tuned to downconvert incoming signals so that they fall within your spectrum analyzer range between 0 and 1 GHz. Being straight downconverted signals, you can work with all the resolution and features inherent in your existing spectrum analyzer. In addition the AVCOM analyzer will recognize the extender in use and display the offset frequency. Wide Range Of Frequencies Available! Whether your application is at 1 GHz or all the way up to 8.5 GHz, a standard MFC has you covered. Dual configurations are also available to give you dual ranges in one unit. Custom order units are available up to 18 GHz! DC Power Options The MFC Converter operates on 12VDC and may be powered by a separate power supply or coaxially if your analyzer has DC insertion capabilities. DC insertion posts are available to power LNB’s, line amps, and other line powered devices in line.

Product Categories