The ADH NETCOM automatic dehydrator supplies low pressure dry air to keep waveguide and coaxial cable dry. Output pressure is field configurable between 0.10 psig and 7.50 psig (7mbar – 517mbar) in 0.01 psig (0.67mbar) increments. Factory default pressure is 0.5 psig (34.5mbar). Operational monitoring and alarms are software based making them highly configurable in the field. Future software features can be installed while in service over the internet or local Ethernet networks
Pricing Varies
Enclosure:
Dimensions: 15.31" × 18.06" × 9.28" (389mm × 459mm × 236mm)
Weight:24 lbs (7.26 kg)
Cover Attachment: Hinged, Lockable
Protection: IP66, NEMA 4X Entries: 1 × 0.88" (22mm) entry for supply power 2 × 0.63" (16mm) entry for dry pressurized air andcondensate discharge
Power:
Supply voltage:100-240 VAC, 50/60 Hz
Maximum current: 2.0 Amps at 100 AC
Power usage: 150 W max
Heat dissipation: 512 BTU/hr max @150 W
Output:
Flow rate:25.4 scfh (12 lpm)
Maximum pressure:7.5 psig (517mbar)
Internal safety relief valve Display units: 8 psig (552mbar)
Display units:SI (millibars); English (psig), default
Discharge port:1/8" NPT 3/8" or 1/4" hose barb (both included)
Environmental:Operating temperature: −40°F to 130°F +/-2°F (−40°C to 55°C +/-1°C)
Storage temperature: −40°F to 150°F (−40°C to 60°C)
Cold Start: Pressurization will commence when internal
temperature reaches 32°F (0°C) or above; 11
minutes at −4°F (−20°C)
