The RBR Series is a Beacon Receiver based on the high-performing single-board Spectrum Analyzers and Beacon Receiver (SBS) products. Avcom has integrated the SBS product into a standard 19” rack enclosure. The RBR product provides same high performance of the MIL-spec compliant SBS module product in a convenient rack enclosure, all at a cost effective price. This enables the user to install the RBR in any standard 19” rack system and access the spectrum analyzer and beacon receiver functions via the included software GUI over IP.
$4,032.75
|
RF |
|
|
INPUT CONNECTOR: |
BNC standard. N, TNC, F, & SMA available. |
|
INPUT FREQUENCY RANGE: |
950 to 2150MHz |
|
TUNING STEP SIZE: |
1KHz |
|
INPUT LEVEL RANGE: |
0 to -115dBm |
|
MAXIMUM INPUT POWER LEVEL: |
+10 dBm max |
|
DETECTION BANDWIDTH: |
10 to 750 kHz |
|
TRACKING BANDWIDTH: |
10 to 120 kHz |
|
DETECTED BEACON LEVEL FILTERING: |
Low-Pass, 0.5 Hz, fixed |
|
PERFORMANCE |
|
|
SEARCH/TRACK RATE: |
10Hz |
|
ACQUISITION TIME: |
<2 second typical |
|
ADJUSTABLE DELAY BEFORE LOCK: |
0 to 5000 milliseconds |
|
BEACON TYPE: |
CW, BPSK |
|
ACQUISITION/TRACKING LEVEL: User Bandwidth: ≤ ± 37 kHz ≤ ± 92 kHz ≤ ± 375 kHz RBW Filter: 3kHz 10kHz 30kHz Min C/No 40 dB-Hz 44 dB – Hz 48 dB - Hz |
|
|
M & C |
|
|
ETHERNET: |
10/100 Auto, RJ-45 and 8-pin header |
|
IP ADDRESS: |
DHCP or Static |
|
SIZE: |
16.75” L x 8.875” W x 5.00” H |
|
WEIGHT: |
5lbs |
|
USB: |
Type - B |
|
INCLUDED CONTROL APPLICATION: |
Avcom GUI (Windows) |
|
APPLICATION PROGRAMMING INTERFACE (API): |
POSIX-compliant ‘C’ Pre-built Libraries for Windows and Linux x86 Source code available |
|
PROTOCOL: |
High-reliability closed-loop with error checking |
|
RECEIVER OUTPUT VIA PHYSICAL OUTPUTS? |
Yes |
|
RECEIVER OUTPUT VIA M&C INTERFACE: |
Yes |
|
RECEIVER OUTPUTS |
|
|
CONNECTOR: |
Analog: BNC, Lock: DB-9 |
|
ANALOG SIGNAL STRENGTH OUTPUT LEVEL: |
0 to 10 VDC, 5 mA max to maintain linearity |
|
ANALOG SLOPE: |
0.25 to 2.5 Volts/dB |
|
ANALOG SLOPE POLARITY: |
Positive or Negative |
|
ANALOG OUTPUT FILTERING: |
Low-Pass, 0.5 Hz, fixed |
|
DIGITAL LOCK INDICATOR OUTPUT: |
0 to 3.3 VDC |
|
DIGITAL LOCK INDICATOR OUTPUT POLARITY: |
Adjustable (H=LOCK or L=LOCK) |
|
POWER |
|
|
CONNECTOR |
2.1mm DC |
|
POWER SUPPLY |
15 VDC, 7W |
|
PHYSICAL |
|
|
DIMENSIONS |
19”W x 18”L x 1.75”H |
|
WEIGHT |
7lbs |
|
ENVIRONMENTAL |
|
|
OPERATING TEMPERATURE |
-20 to +60C |
|
STORAGE TEMPERATURE |
-40 to +85C |
|
HUMIDITY |
0 to 95%, non-condensing |
