The RSA-6500A offers a wide range of frequency coverage including the HF, VHF, UHF, L, S, and C bands. C-Band and S-Band (uplink and downlink) and IF frequencies can be monitored with a single unit. Additional inputs available for whatever the application calls for. Visit any teleport and there is a good chance that you will see an AVCOM RSA spectrum analyzer operating in the rack. The RSA offers the integrator total flexibility in a 1U chassis. Configuration option makes the RSA the spectrum analyzer of choice with many SATCOM locations. It should be noted that individual inputs cannot be monitored simultaneously with the RSA, but up to 12 different RSA’s can be monitored simultaneously from a central location using the AVCOM remote control software. Whether you need a custom design or a simple design for your SATCOM needs, the RSA offers versatility at its best.
$6,170.25
|
Frequency Range |
Input 1-3: 5MHz - 2500MHz Input 4: 2.5GHz - 4.2GHz Input 5: 3.5GHz - 5.5GHz Input 6: 5.5GHz - 6.5GHz |
|
SPAN WIDTH: |
Up to 1300 MHz (Dependent on Center Frequency) |
|
RESOLUTION BANDWIDTH: |
10KHz, 100KHz, 300KHz, 1MHz |
|
RF SENSITIVITY: |
Greater than -85 dBm Typical |
|
REFERENCE LEVELS: |
Selectable -10 dBm, -30 dBm, & -50dBm (front panel) (5dBm increments in GUI) |
|
SCALE: |
5 dB/Div & 2 dB/Div |
|
DYNAMIC RANGE: |
50dBm GUI window |
|
AMPLITUDE ACCURACY: |
± 1 dB typical |
|
FREQUENCY ACCURACY: |
± 1KHz typical |
|
MAX RF INPUT: |
25 VDC MAX (DC Blocked), +30dBm (1W) Input 1-3: +20dBm (1W), Inputs 4-6: 0dBm |
|
INPUT IMPEDANCE: |
50 Ω |
|
AMPLITUDE RANGE: |
0 dBm to -85 dBm (standard) 0 dBm to -105 dBm (preamp option) +10 dBm to -65 dBm (attenuator option) |
|
INPUT CONNECTOR: |
Input 1-3: BNC is standard. F, TNC, SMA, N Available. Input 4-6: N |
|
LNB POWER: |
13-18V, 22kHz (optional) |
|
OPERATING TEMPERATURE RANGE: |
-10°C to +60°C |
|
SIZE: |
19” W x 18" L x 1.75” H |
|
WEIGHT: |
7.8lbs |
|
POWER REQUIREMENTS: |
+15 VDC/ 9W |
